NO WATER GETTING INTO WASHING MACHINE

N

Nicetoseeyoutoseeyounice

Joined
18 Sep 2006
Messages
336
Reaction score
1
Location
Lancashire
Country
United Kingdom
My washing machine is just a coupon of years old, warranty expired.

The water inlet hose had a tiny leak In the hose itself, dont know how but anyway, I had a spare, disconnected the leaking hose, a simple task, and fitted the spare hose, put the water back on, switched the machine on, and no water is getting through to the machine.

switched water back off, undone the inlet to the machine, put the hose over a bucket and switched water back on for a second, no probs, water comes gushing out the end into my bucket. So, has anyone got any ideas as to why the machine is not taking the water.

Any advice would be greatly appreciated.
 
There is a filter/gauze on the washer, everything looks very clean, both ends of the hose and the inlet slot at the back of the machine.

I know this could all be coincidence but the machine actually worked fine yesterday, this is when I noticed a little water at the side of the machine, pulled it out and this is when I spotted a tiny nip in the outlet hose, but absolutely worked fine yesterday.

I wouldn’t have a clue about solenoids etc etc and don’t want to have to fork out, possibly unnecessarily, on a new machine.
 
I’ve put the old hose back on, even though it drips, and the machine works fine, so, I’ll just order a new genuine part hose pipe and put this on when it arrives.

thanks to those who responded.
 
You must log in or register to reply here.
Back
Top