Good evening all,
We are currently in the process of having a loft extension. First the good news - the plastering in the actual loft space and new stairway seems to have been done quite well - I have no complaints, and am genuinely quite looking forward to giving it a mist coat and decorating.
The issue that we might have is the plastering that has been done on the underside of the new staircase, and where part of the old chimneybreast has been removed on the existing staircase.
I have attached some pictures that hopefully demonstrate this a little better than I am able to explain, but in summary:
Underside of staircase.
Plumbing and electrics were tacked to the underside. The entire thing was then covered with a wire mesh. The "messy" bit seems to be around the newel post of the stairs - it's uneven, and I'm right now struggling to see how I will neatly tie this in between the plaster wall emulsion and the eggshell finish on the wood. Fortunately both will be white, but surely this can't be right? When I queried with the plasterer why the line wasn't straight, he said that he had to work around how the wire mesh had been applied, but if this is correct, it seems as though the mesh should have tidied up first? I'm keen to resolve whilst builders and plasterers are on site, but I genuinely just don't know what the usual approach here would be.
Removal of chimney breast and making good
For the most part, he seems to have done a good job feathering into the existing wall. However, near the bottom of the wall, there's a large bulge in the newly applied plaster, meaning that there's no room to put in any skirting.
Many thanks in advance all!!!
Ray
We are currently in the process of having a loft extension. First the good news - the plastering in the actual loft space and new stairway seems to have been done quite well - I have no complaints, and am genuinely quite looking forward to giving it a mist coat and decorating.
The issue that we might have is the plastering that has been done on the underside of the new staircase, and where part of the old chimneybreast has been removed on the existing staircase.
I have attached some pictures that hopefully demonstrate this a little better than I am able to explain, but in summary:
Underside of staircase.
Plumbing and electrics were tacked to the underside. The entire thing was then covered with a wire mesh. The "messy" bit seems to be around the newel post of the stairs - it's uneven, and I'm right now struggling to see how I will neatly tie this in between the plaster wall emulsion and the eggshell finish on the wood. Fortunately both will be white, but surely this can't be right? When I queried with the plasterer why the line wasn't straight, he said that he had to work around how the wire mesh had been applied, but if this is correct, it seems as though the mesh should have tidied up first? I'm keen to resolve whilst builders and plasterers are on site, but I genuinely just don't know what the usual approach here would be.
Removal of chimney breast and making good
For the most part, he seems to have done a good job feathering into the existing wall. However, near the bottom of the wall, there's a large bulge in the newly applied plaster, meaning that there's no room to put in any skirting.
Many thanks in advance all!!!
Ray