Pyronix alarm stuck!

G

Graham Lucas

Joined
31 Jan 2021
Messages
1
Reaction score
0
Country
United Kingdom
Hi,
I have a pyronix alarm (46) and I have setup zone C. It’s not stuck in an armed position. I can see from some Googling pyronix changed the settings and it’s clear my codes (usual user code or engineering code) don’t work with c due to the settings.
I need to unarm zone c before it will let me into the engineering menu. It’s like chicken and egg! How do I unarm first so I can get into the setup?
Any help would be great!
Thanks
 
Lol...you will have to default the panel unless you have a manager code that has not had the settings changed ..
 
How was zone C armed? Do you have any remote key fobs or prox tags that’s could be used?
 
At a guess quick set was enabled and “ yes C “ was pressed ...had a customer who did this after changing master code and messing with the levels ....luckily it was on pyronix cloud and was able to change it remotely...
 
sparkymarka said:
At a guess quick set was enabled and “ yes C “ was pressed ...had a customer who did this after changing master code and messing with the levels ....luckily it was on pyronix cloud and was able to change it remotely...
Click to expand...
Doh! Well every day is a learning day haha
 
If you are familiar with the back door procedure you can create a duress code to unset the area
 
Ladders handy to get to the bell box? Novice solution is to kill the mains power, disconnect the panel battery and then climb up and disconnect the batteries in the bell box. Apologise to the neighbours afterwards :oops:
 
Surely dropping the mains and battery to the system then powering back up will put it back to an unarmed state?
 
You must log in or register to reply here.
Back
Top