- Joined
- 30 Nov 2017
- Messages
- 4
- Reaction score
- 0
- Country
Hi all
Is there anybody that help me with this please, I am desperate. I have bought a house this year fully kitted with a Pyronix enforcer 32. When I was renovating the house I remove all power from the control panel and the plan was to move the panel to a different area. But from my little knowledge of alarm systems I firsts of all tampered with the panel and second I let the battery run flat.. So now when replaced the battery and connect the mains back , the system is asking for a "Engineer restore".
The only way I can do this is get into engineering settings , but the only problem is the previous owner has only left me the main user code and no other codes. I have no clue who has installed the system so I cannot contact to find out what the codes are.
So from my research I have found numerous manuals with default codes such as 1111, 9999 , 2222. But none of these are working . So obviously the codes were changed. I have also come across where the PVM can be reset on other panels but I cannot seem to find out any information on how to carry out the procedure with this system. If anyone knows please let me know.
I have asked a local engineer to call out to have a look at it and he is charging me over a £100 to just look at it, whether he fixes it or not.
Has anyone any ideas please. Any help if appreciated.
Is there anybody that help me with this please, I am desperate. I have bought a house this year fully kitted with a Pyronix enforcer 32. When I was renovating the house I remove all power from the control panel and the plan was to move the panel to a different area. But from my little knowledge of alarm systems I firsts of all tampered with the panel and second I let the battery run flat.. So now when replaced the battery and connect the mains back , the system is asking for a "Engineer restore".
The only way I can do this is get into engineering settings , but the only problem is the previous owner has only left me the main user code and no other codes. I have no clue who has installed the system so I cannot contact to find out what the codes are.
So from my research I have found numerous manuals with default codes such as 1111, 9999 , 2222. But none of these are working . So obviously the codes were changed. I have also come across where the PVM can be reset on other panels but I cannot seem to find out any information on how to carry out the procedure with this system. If anyone knows please let me know.
I have asked a local engineer to call out to have a look at it and he is charging me over a £100 to just look at it, whether he fixes it or not.
Has anyone any ideas please. Any help if appreciated.
