Pyronix Enforcer Battery Issue

[Mb90]

Hi,

We've had a pyronix enforcer alarm for around 3 and a half years. Not sure on model.

Last month it came up with wireless batt fault so i replaced them all with cr123a and the problem went away.

This morning we were woken by the same fault.

Other than the obvious - one of the new batteries was faulty - any ideas? I'd rather avoid replacing all batteries again.

Thanks

 

[sparkymarka]

Are you sure it’s not the siren battery ? Did you change it ?

 

[Mb90]

Are you sure it’s not the siren battery ? Did you change it ?

Not changed the siren battery, but its the same fault as when the PIRs are low

 

[sparkymarka]

I get more siren low batteries than I do detector batteries , press D then your code scroll to log and read the log it will tell you what was flagging up low battery

 

[Mb90]

I get more siren low batteries than I do detector batteries , press D then your code scroll to log and read the log it will tell you what was flagging up low battery

Hi, have checked says wireless low batt which is what it has said before when I've changed the batteries in the PIR. No mention of siren

 

[sparkymarka]

When it says wireless low battery press A button

 

[Mb90]

When it says wireless low battery press A button

Says Siren 1 - assume that's bell box and a call out?

 

[sparkymarka]

No that’s a set of ladders and a battery pack

 

[Mb90]

Will give it a go - thanks for the help