Pyronix Enforcer DeltaBell X

K

Kamy

Joined
28 Dec 2017
Messages
21
Reaction score
1
Country
United Kingdom
Recently purchased a Enforcer alarm kit 1 and also purchased a Deltabell X as I wanted it to be fully backlite unlike the Plus which looks faulty.

Wanted to know if the enforcer can power the and work with the X ans if so what mode I would need to run it in.

Thanks
Kamy
 
I have looked at other forums without getting a definate yes or no hence posting on here.

Some say yes some so no!

Also it would be nice to know what mode to run it im sab or scb?
 
Your going to have to run it in a scb mode to be on safe side , the strobe takes most current on a traditional bell box , delta bell plus / x has led strobe so lower current
 
So just to confirm I wont damage the panel's i/o board by using the X and running it in scb mode?

I also read the panel demands are 300ma and the panel only able to handle 250ma?
 
Delta bell 300ma in alarm
Control panel 250ma
Run in SCB mode
Could also add additional power supply for bell box ?
 
I was speaking to a Pyronix authorised installer today who says he both seen by others and fitted lots of DB X's with the enforcer with no issues and also running in SAB mode!!! Think a call to Pyronix themselves is going to settle this.
 
You must log in or register to reply here.
Back
Top