Pyronix Enforcer ENF32GB - Going Off

J

james_help

Joined
14 Aug 2007
Messages
253
Reaction score
7
Country
United Kingdom
Hi all,

I installed this in 2016 and only recently has the alarm been going off during random hours of the night when set. I have attached a picture to show the issue.

I have tested the signal strength and the signal is very good for all devices paired, I had done a system test and all is coming back normal. When installing the bellbox I did hear the "click" from what I remember.

Any advice please?

IMG_8959.JPG
 
Faulty bellbox tamper switch ....I've replaced a couple so far ...check the tamper switch to see if it's a green and black one
 
sparkymarka said:
Faulty bellbox tamper switch ....I've replaced a couple so far ...check the tamper switch to see if it's a green and black one
Click to expand...

Thank you for your reply, I will check on the weekend, do I replace the switch if it is the green and black one.
 
Last edited:
You must log in or register to reply here.
Back
Top