Pyronix Enforcer help

[pepperdog]

Is anyone able to give me a step by step guide of how I change my piazo sounder in my enforcer internal keypad/control panel please? Thank you

 

[Handymanjo]

Put control panel in engineering mode if possible.
If not use user code to cancell noise.
Open control panel lid,remove the 4 screws holding pcb cover.
Speaker top left corner with molex connection.
Unplug lead,remove piezo from holder and replace with new piezo.
Now replace lid and screw,close control and come out of engineering or reset with code.
May be easier to remove power connection at start.

 

[pepperdog]

Ah that’s brilliant thank you for your help much appreciated

 

[Bigsosij]

Make sure the cable is away from the prox reader too

 

[pepperdog]

Thanks and will do

 

[Bigsosij]

Probably best to power down first aswell

 

[pepperdog]

ok thanks again when you say power down just disconnect?

 

[Bigsosij]

Disconnect mains supply and backup battery

 

[pepperdog]

Magic, again thank you for your help