Pyronix Enforcer Key Fob lights flashing almost continuously

CorrieCranstoun · 18 Sep 2018

Hi, I have a Pyronix Enforcer system. My KF4-WE key fob is on the blink. Sometimes when I press any button I get a single amber flash. Sometimes the red and green LEDs flash alternately for over a minute.

The battery is fine (I have tested it and also swopped it into a second fob).

I have tried removing and re-adding myself as a user, and I have tried re-programming the fob to my profile on the panel. The fob won't communicate with the panel at all.

Is it kaput? Thanks in advance for any insight

sparkymarka · 18 Sep 2018

Have you tried defaulting the radio fob ( via the fob buttons ) and relearning it again ?

CorrieCranstoun · 18 Sep 2018

Hi @sparkymarka thank you for the response. I haven't tried that.... do you happen to know the button sequence?? TIA

sparkymarka · 18 Sep 2018

CorrieCranstoun · 18 Sep 2018

Ah right, yes, I have tried that already, thank you though

sparkymarka · 18 Sep 2018

I have found ,you have to delete the fob and relearn again within a few seconds ...

CorrieCranstoun · 19 Sep 2018

thank you - I have successfully deleted and re-added myself

I am not celebrating just yet as I did this at the weekend and it went on the blink again within 24 hours..... watch this space.

Alan Hanson · 30 Oct 2018

Hi did you manage to sort this?

i changed the battery in my key fob recenlty all was ok for a couple of weeks but now the keyfob wont communicate/set the alarms with the box? the key fob lights up correctly when buttons are pressed?

CorrieCranstoun · 31 Oct 2018

Alan Hanson said:
Hi did you manage to sort this?

i changed the battery in my key fob recenlty all was ok for a couple of weeks but now the keyfob wont communicate/set the alarms with the box? the key fob lights up correctly when buttons are pressed?

Hi Alan - turned out it was a faulty key fob battery with me after all, double check your battery, try a different one, reprogram it... good luck