Pyronix Enforcer V11 Upgrade Kit

K

kaycee81

Joined
26 Feb 2013
Messages
38
Reaction score
2
Location
Essex
Country
United Kingdom
Hi everyone

I am upgrading my Enforcer from V9.51 to V11 using the Pyronix Enforcer V11 upgrade kit, which comes with a new PCB and associated kit in the box.

I notice that a new power cable that goes from the PSU to the front panel is included in the box, and this has an additional flylead on it.

I have attached a picture showing the cable connected to the PSU, with the 3-pin block on the other end going to the front panel; unsure of the pink flylead and where it needs to go.

I can't seem to find where this additional flylead is supposed to be connected - the documentation doesn't mention this flylead from what I can tell.

Can anybody assist with this please?
 

Attachments

  • 20230911_095612.jpg
    20230911_095612.jpg
    219.4 KB · Views: 135
Pyronix confirmed that this lead is to be connected to Earth, just in case anyone wondered!
 
Could you pls kindly update how is the upgrade kit working as I am planning to buy and install to V9 version. Also part of me thinking to buy the whole v11 panel for double the price. Thanks
 
Any thoughts on if the upgrade kit is worthwhile?
I already have cloud access, so not sure what else I would really gain?
 
Not a lot unless adding new devices.
Obviously new board comes with 1 year free cloud subscription so makes it worth a little more I guess.
 
You must log in or register to reply here.
Back
Top