- Joined
- 25 Nov 2018
- Messages
- 14
- Reaction score
- 0
- Country
The manual for the MC1/Shock/WE shows the shock calibration jumper in the middle of the sensor but the physical sensor has not jumpers at this location. The physical sensor has 3 pairs of jumpers in total but none in the middle of the sensor as per the manual. Two pairs of jumpers are at no.1 in picture and 1 pair at no 2 in the picture. The pair at no.2 in the picture is correctly marked and enables/disables the magnetic contact. One of two pairs (no.1) is used to enable/disable LED's. Which of the jumpers is for the vibration calibration?
It's just that the images in the manual, included with the device, does not match the physical sensor!
It's just that the images in the manual, included with the device, does not match the physical sensor!