We have a Spectus patio door frame between our lounge and conservatory. We've already had the doors removed. We were hoping to remove some plasterboard and pull the frame forward but we've found out that 10-15mm of the frame is behind brickwork ... which we don't want to touch.
We can't find any screws on the frame either.
Is it possible to cut out some plasterboard on either side of the frame for leverage and then literally cut through the plastic / metal frame to dismantle it in sections?
Hoping this will be the cheapest solution! Thanks.
We can't find any screws on the frame either.
Is it possible to cut out some plasterboard on either side of the frame for leverage and then literally cut through the plastic / metal frame to dismantle it in sections?
Hoping this will be the cheapest solution! Thanks.
Last edited: