Hi I'm looking for some help regarding replacing my Ep2000 with possibly a smart programmer.
Currently I have a Moes smart wifi
thermostat connected to the Ep2000. The heating slider on the EP is set to permanently on and controlled by the thermostat.
The hot water slider is set to timed and heats the water twice a day.
Everything works as it should.
The Ep2000 activates a Danfoss 3 way motorised valve and there is a thermostat attached to a hot water cylinder.
Can anyone recommend a decent smart programmer preferably grey or silver and on looking at the attached wiring picture advise me on how easy it would be convert the wiring to the new
programmer.
Thanks in advance.
Eddie
[]
Currently I have a Moes smart wifi
thermostat connected to the Ep2000. The heating slider on the EP is set to permanently on and controlled by the thermostat.
The hot water slider is set to timed and heats the water twice a day.
Everything works as it should.
The Ep2000 activates a Danfoss 3 way motorised valve and there is a thermostat attached to a hot water cylinder.
Can anyone recommend a decent smart programmer preferably grey or silver and on looking at the attached wiring picture advise me on how easy it would be convert the wiring to the new
programmer.
Thanks in advance.
Eddie
Last edited: