Reusing Pyronix Key fob

L

lolekbass

Joined
21 Sep 2018
Messages
20
Reaction score
0
Country
United Kingdom
Hello Guys.
I recently replace panel in my Alarm system.
I replace Pyronix Enforcer v9 with v11
I done this because we didn't have Engineer code from previous owner and there was no wifi connection.
We replace v9 with v11, reuse existing PIR and contact sensors and wired keypad but we are struggle to add old fobs to new panel.
Fob's - KF4-WE

MANAGER MENU:
-EDIT USER
-ADD NEW USER
-EMPTY USER - YES
-ENTER USER CODE
and then press and hold 2 top button (lock and unlock) but nothing is happening

any suggestion what we are doing wrong ?
 
Also on the enter user code screen you only need to push and hold button 1
 
From memory go to add fob press and hold top and bottom button until
The light comes on solid then release now press the internal two buttons
 
Thank you Guys
All fobs added and works

One more question
What to change in menu to show on panel screen alarm status (Arm or Disarm)?
 
Hi Guys.

I nearly finished installation but I have two more question.
- What mean "c" on screen next to time (I can't find anything in manual)
- Is there any chance to program panale to automatic disarm alarm every morning?
 
Hi Guys.
One more question.
How to disable backlight on Deltabell plus? Do I need to link "12V-" terminal with "backlight disable" terminal?
 
You must log in or register to reply here.
Back
Top