Rewiring LED fairylights?

[Guerns]

Hey guys, I've got a bit of a problem I could really use some help with.

I'm installing these around a cafe that is soon to open but unfortunately they were cut during installation. I was wondering if there is any way that they can be soldered or wired back together successfully without risk of blowing up or short circuiting anything...? Can I just rewire any wire to any wire or do they need to match up to the wires that they were originally the one line with in order to get back the constant circuit? I'm not too fussed if I lose the different flashing modes but if I can save that as well it'd be a bonus.

Any and all help much appreciated!

 

[securespark]

How many wires are cut?

Do these run on 220V or from batteries?

 

[jj4091]

http://www.allenergies.net/lighting/led_specs.html so no you cannot connect the wires in a different order to original.

 

[Guerns]

How many wires are cut?

Do these run on 220V or from batteries?

All 5, and yes they run off the bog standard 220V setup.

I'll have a fiddle around with the wiring combinations and see if I can get everything back in working order.