Risco Media Loss - Com. Module PSTN

L

Localmcmoo

Joined
10 Sep 2012
Messages
11
Reaction score
0
Location
London
Country
United Kingdom
Hello,

I have a risco Lightsys alarm. recently we have removed our phone line. Alarm now comes up with a fault as in the heading - Media Loss - Com. Module PSTN
I know the installer code and have been going through the options however i cannot see one for the PSTN module. The Alarm was configured to call if it was to go off.
I would be happy to arm the alarm with the fault if thats an option.

Thanks
 
Thanks @secureiam - done that. The problem is when i go into the programming menu as i scroll through number 5 - communications is missing.

1 system
2 zones
3 outputs
4 codes
6 Audio
7 Install
8 Devices
0 Exit
 
If the menu is missing, that’s usually inducative of not having the right level of access.

Lots of risco products have two levels of engineers codes.

The manual should state if these restrictions exist,
Also some of there systems auto detect modules and only provide menus accordingly.

To go forward take pictures of the pcb and any add a ons. Depending on the version you have things maybe slightly different.

Dont see many pstn systems anymore as they have been pulling the plug for many years on pstn.

With the versions and pictures should be able to get to the bottom of things.
 
Thanks @secureiam. I am far from an alarm engineer. Will the alarm go off if i take of the panel cover? If so Is there somewhere where i would disable this?
 
Hoping these pictures help.
If there is an option to arm despite the PSTN fault i am also ok with this.

Thank you!

1709549296851.png
1709549453611.png
1709549374941.png
 
Down power unplug the pstn power back up.

The fact it’s not on the list though in the menus suggests it’s not available anyway
 
Thank you. Powered down the unit. Unplugged the battery backup. Alarm went off! Unplugged pstn module after googling what it looks like. Powered back up. Turned off the alarm. I am now able to arm my alarm system. Thank you. I'm sure it does need some professional tweaks at so e point however for now I am good.

Thanks for your assistance and direction.
 
You must log in or register to reply here.
Back
Top