Run-on timers

A

absolute0

Joined
17 Feb 2013
Messages
20
Reaction score
0
Location
Rutland
Country
United Kingdom
I'm looking to add a separate remote run-on timer to an existing bathroom fan. The fan is rated at 8w/240v.

Looking at the Manrose 1351 it mentions minimum load of 20w, so no good.

Can anyone recommend a decent run on timer please? Anyone used the RT5A timer?

I won't be adding an integrated timed fan due to only having twin core and earth being supplied to the fan, which is tiled in.

TIA
 
Is it a bog standard (no pun intended) 100mm wall fan?

In which case it is probably easier to swap the whole unit.

EDIT:

Sorry, missed the bit about twin and earth.
 
Thanks, SunRay.
I went ahead and purchased the same one in the end.

Haven't installed it fully yet, but tested against my new fan and all works well. The casing is a little cheap, but it's going in the loft so not too worried.

Thanks all
 
You must log in or register to reply here.
Back
Top