- Joined
- 29 Feb 2020
- Messages
- 3
- Reaction score
- 2
- Country
I’ve reset my thermostat and re-paired it to the receiver (red light goes from flashing to permanently on) but the green light doesn’t come on unless I switch it to manual.
When switched to auto, the thermostat doesn’t switch the green light on when the flame indicator is on; I set the thermostat to well above the current temperature so would expect the boiler to fire up and heat the radiators etc
any ideas why it’s not controlling the receiver?
When switched to auto, the thermostat doesn’t switch the green light on when the flame indicator is on; I set the thermostat to well above the current temperature so would expect the boiler to fire up and heat the radiators etc
any ideas why it’s not controlling the receiver?