Anybody know how to repair these? I've got two old ones thrown out from our labs, one that I know works but the display has just broken and one with a working display but it doesn't weigh. I want to try to cannibalise them to make one that works.
Sartorius L2200S electronic lab balance.
- Thread starter RigidRaider
- Start date
B
breezer
swop the bits from one to the other?
Have you seen the inside of one of these?
- Joined
- 2 Apr 2006
- Messages
- 1,896
- Reaction score
- 29
- Country
Nope. But what choice do you have. Either sell them for spares or repair or swap the bits over.
Hello. sorry to bother you. I need to write some code to connect and read the weight from a Sartorius Balance (LP Series). Does someone have some Delphi example that can do it? thank you
Firstly, it's always better to start a new thread, rather than resurrecting one that's 16 years old!
I'm afraid I can't help with Delphi, but what stage are you at, with communicating with the balance?
Do you have an RS232 cable, are you able to send commands / receive results, do you have any software tools, such as NI VISA?
If you haven't access to a manual, I beleive the serial commands are on p65 of the attached...