Had bi folding doors installed earlier in year, pre COVID. We lifted the inside floor by installing a DPM, sandblinded to level, overlayed 100mm insulation then covered with 22mm caberdeck flooring.
As the DPM covered the bottom of the door I didn't take a lot of notice as we installed the floor 20mm below the door looking to get a level floor without any steps, once covered with hardwood floor.
It appears the bifolds were installed 15mm out of level (company now gone) so the floor will look uneven across the bottom.
Can you self level over the top of caberdeck to bring up level? We only really need to level half way across and blend back into the room.
Unsure if it would adhere with the boards being waterproof.
Any help would be appreciated.
As the DPM covered the bottom of the door I didn't take a lot of notice as we installed the floor 20mm below the door looking to get a level floor without any steps, once covered with hardwood floor.
It appears the bifolds were installed 15mm out of level (company now gone) so the floor will look uneven across the bottom.
Can you self level over the top of caberdeck to bring up level? We only really need to level half way across and blend back into the room.
Unsure if it would adhere with the boards being waterproof.
Any help would be appreciated.