Here are a few pictures of the project,
The first job was to cut away the hedge at the rear of the garden, which unearthed this massive root ball from a previous tree, it took me ages to dig it out, but was far to heavy to move.
[GALLERY=media, 12295][/GALLERY]
Concrete fence posts, installed, on the neighbours boundary....
[GALLERY=media, 12296][/GALLERY]
Two concrete gravel boards fitted to hold back the bank, and a 4' fence panel fitted above to hide old boundary fence.
[GALLERY=media, 12297][/GALLERY]
Missed a photo of the concrete base, but laid a 150mm concrete base, and you will also notice the garden wall on the RH side, i had to remake this as it ran along where the shed is standing originally.
[GALLERY=media, 12298][/GALLERY]
Put weed membrane down to stop weeds as temp measure
[GALLERY=media, 12299][/GALLERY]
Decided to have a decking area to the front of the shed to tidy the area up, also give us a place for a bistro table and two chairs.
[GALLERY=media, 12300][/GALLERY]
Cause i wanted to have a border and also pattern on the decking, i needed a lot more wood supports than normal, nothing like an easy life.
[GALLERY=media, 12301][/GALLERY]
The finished decking, hard work but worth the effort...
[GALLERY=media, 12302][/GALLERY]
Anyone for coffee
[GALLERY=media, 12347][/GALLERY]
The first job was to cut away the hedge at the rear of the garden, which unearthed this massive root ball from a previous tree, it took me ages to dig it out, but was far to heavy to move.
[GALLERY=media, 12295][/GALLERY]
Concrete fence posts, installed, on the neighbours boundary....
[GALLERY=media, 12296][/GALLERY]
Two concrete gravel boards fitted to hold back the bank, and a 4' fence panel fitted above to hide old boundary fence.
[GALLERY=media, 12297][/GALLERY]
Missed a photo of the concrete base, but laid a 150mm concrete base, and you will also notice the garden wall on the RH side, i had to remake this as it ran along where the shed is standing originally.
[GALLERY=media, 12298][/GALLERY]
Put weed membrane down to stop weeds as temp measure
[GALLERY=media, 12299][/GALLERY]
Decided to have a decking area to the front of the shed to tidy the area up, also give us a place for a bistro table and two chairs.
[GALLERY=media, 12300][/GALLERY]
Cause i wanted to have a border and also pattern on the decking, i needed a lot more wood supports than normal, nothing like an easy life.
[GALLERY=media, 12301][/GALLERY]
The finished decking, hard work but worth the effort...
[GALLERY=media, 12302][/GALLERY]
Anyone for coffee
[GALLERY=media, 12347][/GALLERY]
