Hello and thank you for reading this post.
A shower mixer tap is part jammed. It's the temperature adjustment side. The adjuster turns ok but the mechanism / cartridge inside must be jammed because the water temperature does not change.
There is no manufacturer name on the unit. It was installed in 2005. Please see three photos below.
When changing a flow cartridge before on another mixer elsewhere, there was a small screw cover at the end which popped off ok and then the adjuster came undone by unfastening the screw. But on the jammed mixer, what looks like a screw cover at the end of the temperature adjuster won't come off.
Does anyone recognise this unit in the photos? Does the cover pop off as with other units?
Thank you.
A shower mixer tap is part jammed. It's the temperature adjustment side. The adjuster turns ok but the mechanism / cartridge inside must be jammed because the water temperature does not change.
There is no manufacturer name on the unit. It was installed in 2005. Please see three photos below.
When changing a flow cartridge before on another mixer elsewhere, there was a small screw cover at the end which popped off ok and then the adjuster came undone by unfastening the screw. But on the jammed mixer, what looks like a screw cover at the end of the temperature adjuster won't come off.
Does anyone recognise this unit in the photos? Does the cover pop off as with other units?
Thank you.
) just change the whole thing... No rip-off cartridges or smashing out and retiling to worry about 
