Smart thermostat wiring advice

[DeanJenx]

Hi,

Im looking to purchase a smart programmable thermostat to replace an old Honeywell T6360B, which as you can see from the pics no longer has any print left for temperature setting (was like that when we moved in!) and is pretty hit and miss clicking on and off!

[GALLERY=media, 103894]20200129_224658 by DeanJenx posted 30 Jan 2020 at 10:17 AM[/GALLERY]
[GALLERY=media, 103893]20200129_224642 by DeanJenx posted 30 Jan 2020 at 10:17 AM[/GALLERY]

I am looking to change to a moes BHT-002-GCLW. bu I'm confused slightly by the earth in my old thermostat..

[GALLERY=media, 103895]4524123541246 by DeanJenx posted 30 Jan 2020 at 10:17 AM[/GALLERY]

Am I correct in thinking the following:

Old Live to pin 4
Old N to pin 3
old yellow(3) to pin 2
Old earth not used (omitted)
Jumper from new pin 4 to pin 1

Any advice appreciated!
Dean

 

[EFLImpudence]

Yes. All correct.

Just terminate and position the earth wire safely so that it cannot touch anything.
Do not cut it off.

 

[DeanJenx]

Yes. All correct.

Just terminate and position the earth wire safely so that it cannot touch anything.
Do not cut it off.

Thanks Very much!! much appreciated
Dean