Swapping out an LED spotlight for a pendant

D

DrBunker

Joined
14 Jul 2016
Messages
10
Reaction score
0
Country
United Kingdom
I'm trying to hang a pendant in place of an LED spotlight and I'm confused by the wiring arrangement. I'm used to the simple one live, one neutral and one earth setup but this has two of each:


(not the best picture, I know)

I assume it's because it's a) on a dual switch system and/or b) part of a collection of LED spotlights on a ring. On the existing LED fitting as per the pic each pair of cables goes into one terminal block but this doesn't work on the new fitting.

I've looked through the wiki (e.g. here and here) but I'm not sure any of the diagrams match this setup. What am I missing?
 
That's the one from the first Wiki link I included and I thought it could work but I've only got two main cables. I'm not sure how to match up the diagrams on that page with my setup...
 
I know; that's why I said this here. :)

IF this is the only light fitting operated by the two switches just ignore one of the top two cables in the diagram.
One of the cables which connects to neutral.
upload_2016-7-14_14-43-40.png


IF there is more than one light fitting operated by the two switches then you had better wait until we can see your picture.
 
EFLImpudence said:
I know; that's why I said this here. :)
Click to expand...
Sorry, I'm not following you on this - the link went to the main page... (n)

But... I can confirm that there are a series of LED spotlights all controlled by the same two switches. :) What picture do you need to see to help with this?
 
@TTC

Some pics I took before I removed the old light:

IMG_3524.JPG


IMG_3526.JPG


@Gerrydelasel

That's effectively it, assuming the joins are just there for illustration? The new pendant obviously has a standard chocblock but it would be very hard to fit the two sets of cables directly into it. I thought about wiring it as below but wasn't comfortable restoring power with it like this:

IMG_3533.JPG
 
ban-all-sheds said:
DrBunker said:
Sorry, I'm not following you on this - the link went to the main page... (n)
Click to expand...
How odd, given that the link in EFLI's post IS to the right page....
Click to expand...
At the risk of embarrassing an elder that's what I said...
DrBunker said:
the link went to the main page...
Click to expand...
As I'd already linked to this page in my initial post I didn't see what he was referring to.

He then posted an amended version of one of the diagrams from that page which clarified things.

Thanks for your feedback though. ;)
 
DrBunker said:
The new pendant obviously has a standard chocblock but it would be very hard to fit the two sets of cables directly into it.
Click to expand...
First thing is to try replacing it with a larger piece - it may very well only be attached by being screwed onto the metal tab which earths the body, and can easily be unscrewed and swapped.

But it must be really tiny if you can't get two conductors into each terminal - so much so that the phrase "not fit for purpose" comes to mind. Is the problem simply that the existing conductors are bent and twisted? What size are the cables?


I thought about wiring it as below but wasn't comfortable restoring power with it like this:View attachment 101987
Click to expand...
As long as your piece of choc-block ends up inside the cup of the light that's fine, but you'd probably find it a lot easier to get it all tucked away if you use flex, or even 3 cores from some flex, instead of that short piece of twin & earth.
 
I was confirming that out of your two "heres", this "here" - was the right one but you have to follow the instructions in reverse.
 
ban-all-sheds said:
DrBunker said:
The new pendant obviously has a standard chocblock but it would be very hard to fit the two sets of cables directly into it.
Click to expand...
First thing is to try replacing it with a larger piece - it may very well only be attached by being screwed onto the metal tab which earths the body, and can easily be unscrewed and swapped.

But it must be really tiny if you can't get two conductors into each terminal - so much so that the phrase "not fit for purpose" comes to mind. Is the problem simply that the existing conductors are bent and twisted? What size are the cables?
Click to expand...
It does come off as you describe. In my (admittedly fairly limited experience) it is a pretty standard size for a pendant as usually they only have to deal with a single set of 3 wires coming in. Is it as straightforward as just connecting each pair of incoming cables into the relevant terminal block on the pendant?

ban-all-sheds said:
DrBunker said:
I thought about wiring it as below but wasn't comfortable restoring power with it like this:View attachment 101987
Click to expand...
As long as your piece of choc-block ends up inside the cup of the light that's fine, but you'd probably find it a lot easier to get it all tucked away if you use flex, or even 3 cores from some flex, instead of that short piece of twin & earth.
Click to expand...
Is it essential to have the chocblock inside the cup of the light only there's not really any room in there (or won't be when I shorten the cable length). I have got a lot more t&e cable but I assume I'd be better off running it into a choc box rather than trying to tape up the new wiring?
 
ban-all-sheds said:
So when you click on the link in "It'll be this here in reverse", what is the URL of the page you end up at?
Click to expand...
EFLImpudence said:
I was confirming that out of your two "heres", this "here" - was the right one but you have to follow the instructions in reverse.
Click to expand...
I get to the "Replacing a ceiling rose with a light that only has L/N/E connections" page but it was the in reverse comment I didn't follow (as well as the third cable which was later clarified).
 
You must log in or register to reply here.
Back
Top