Texecom Premier Alarm - 2 sensors must activate before alarm triggers

P

phillsmit3

Joined
21 Sep 2013
Messages
13
Reaction score
0
Location
Lancashire
Country
United Kingdom
Might be a strange question but is there a simple way change a setting on the control panel so that the alarm will only trigger if 2 sensors are activated. We are getting quite a few false alarms and this would solve our problem.
Thanks in advance for any advice. :)
 
sparkymarka said:
Why are you getting false alarms ?
Click to expand...
I think it is due to the tempurature changes as we don't have dual tech pirs. Rather than change all our sensors if there was a possibility that 2 would need to be triggered before the alarm goes off that would work perfectly for us for the time being.
 
I wouldn’t recommend it ….
Post pictures of detectors false alarming
How old is the alarm panel and battery ?
When was it looked at last ?
 
phillsmit3 said:
I think it is due to the tempurature changes as we don't have dual tech pirs. Rather than change all our sensors if there was a possibility that 2 would need to be triggered before the alarm goes off that would work perfectly for us for the time being.
Click to expand...
Enable Beam Pair attribute on Zone settings for the two devices you want, best solution would be to find what's causing the alarms however.
 
You must log in or register to reply here.
Back
Top