Hi. I'm trying to connect my panel to the app and the cloud. It shows up as a site in the cloud service but when I'm trying to verify the panel (having entered an app code and engineer code) it keeps coming back "with response from comms was null". It also does this with the app on my phone. Im on a virgin router and have looked through the settings but can't find anything that looks like it would stop it communicating and as far as I can tell WebSafe is off. Does anyone have any ideas?
Texecom Premier Elite App and cloud issues
- Thread starter The Baron
- Start date
what version is your smartcom?
My smart com is an older version, too old. I found another thread on here regarding the same issue and discovered that I need a newer SmartComm, have spoken to tech support and they are going to send one out so hopefully that will sort the issue. thanks for the reply though.
That’s exactly what I was getting at.
The problem is they should have been updated when you could via the v1 app.
When they made the transition to V2 it needed to be updated. I have original smart com and because it’s been kept upto date same with my customers they haven’t needed replacing.
Texecom did do a mandatory forces upgrade but it wouldn’t take place when system was armed apparently so some got missed.
Unfortunately many didn’t or bought old smart coms off ebay.
At least Texecom are replacing it for you
The problem is they should have been updated when you could via the v1 app.
When they made the transition to V2 it needed to be updated. I have original smart com and because it’s been kept upto date same with my customers they haven’t needed replacing.
Texecom did do a mandatory forces upgrade but it wouldn’t take place when system was armed apparently so some got missed.
Unfortunately many didn’t or bought old smart coms off ebay.
At least Texecom are replacing it for you
Think it’s pre version 3 smart coms.
must of been a long time Version 3 smartcom firmware was out March 2021