Texecom Premier Elite

C

Cloughy

Joined
21 Sep 2023
Messages
5
Reaction score
0
Country
United Kingdom
Hi
I have a Premier Elite installed by an alarm company that i cannot get hold of anymore. I have the engineers codes and have wintex connected.
The problem is that when i enter the house, i get the entry in Area A message, but when it times out only the internal keypad bell works not the outside.
The bell outside does work when the shocks are knocked on the windows when the alarm is armed. The entry is set on both front and back doors and they both do the same.
All sensors apart from a garage pir are wireless. The front and back doors are the shock and entry in one type. Strangely if i knock the door shock when armed it triggers the entry rather than a shock alert. When the internal alarm sounds it says alarm in Area A, but doesn't notify the phone app, which all the window shocks do when triggered.
Any help would be appreciated. Even if the shock had to trigger an entry as long as the external bell sounds on the entry timeout.

Thanks
 
Sounds like two issues.

1. system in entry and doesn’t activate bell until second delay has expired, this can be changed to zero so it goes off after initial entry expires.

2. shock sensor set to E/E rather than guard on force omit, if I u set stand correctly. As the shock can start the entry when ful set as the contact does?
 
Hi,
Yes the external bell sounded after the 30 seconds of the internal. Which setting can reduce this to zero?
Thanks
 
You must log in or register to reply here.
Back
Top