Texecom SmartCom and ComGSM

O

omega11

Joined
26 Feb 2022
Messages
17
Reaction score
0
Country
United Kingdom
HI,
Quick question and I'm guessing the answer, but is it possible to connect both a SmartCom AND a ComGSM to a Texecom Elite 48 panel?

I'm guessing not because both of the coms ports are taken up by the SmartCom, but I thought I'd ask. If it IS possible, how would it be done?

Thanks in advance.
 
@sparkymarka thanks!

So I have been able to connect it up to the Digi Port with the adaptor and it seems to be happy and working (all the right LED's are on), but I cannot seem to assign it in the panel.

If I go to Comms (in Wintex) and then Com Port Options, I'm assuming that I need to set it in "Onboard Digi Com" setting? But in there there is no option to select ComGSM, I only have Com300, 2400, ISDN and ComIP modules as options.

Did I miss something on how to configure it?

Thanks again.
 
What firmware is the panel ? Menu 4 from unset
You may have to use com 2 for gsm and use the com 3 for ip instead
 
Firmware is 6.05.03LS1
The panel doesn't have a com3, only com1 and com2. The ComGSM is connected to the digi modem via the adaptor.
 
OK, got it working, as you suggested, I had to move ComIP to com3 and then use com2 for ComGSM and com3 for ComIP instead.

Seems to be working now as I'm getting SMS!

Many thanks!
 
You must log in or register to reply here.
Back
Top