Texecom SmartCom - JP1 & JP2 bit

[drec]

Hi all, I did search for this without success.

I just installed a SmartCom (all working really simple) but have a bit left over! See below.

As the SmartCom is all working I was wondering what this bit is for. I'm sure it's useful else it wouldn't have been included in the SmartCom box!

Anyone know?

 

[scott1980]

It's to plug onto the digi modem connector on the panel, it basically gives you an additional com port (3) as the Smartcom takes up com 1 and com 2. To be fair, they do mention this on page 9 of the Smartcom manual...

 

[drec]

Thanks - didn't get as far as page 9 of the manual as it was all working

 

[secureiam]

You only need it if your not using a com 300 or com2400 to use the usb com lead or connect another module like a gsm com or comip module.