I've just added a new 8way wireless expander 8XP-W (GCD-0001) to my existing Elite 48. Currently only programmed with one Impaq SC-W from an outbuilding to the expander. Everything seems to be working fine, but later when I went through the Wintex diagnostics I noticed a Network Error code 0004 on the new expander.
I cant seem to find any reference to these codes, does any body have any idea ?
The Elite has latest firmware - 6.02.00. Smartcom has 4.01.03 and the expander is firmware 3.1.10 Wintex 8.2
Also the Expander supply voltage doesn't seem to be showing on the diagnostics either, or is that only shown when using an external supply ? The voltage is a healthy 13.7v on the supply input coming from the Elite 48.
Like I said before everything seems to be working fine, so am I worrying over nothing ?
I cant seem to find any reference to these codes, does any body have any idea ?
The Elite has latest firmware - 6.02.00. Smartcom has 4.01.03 and the expander is firmware 3.1.10 Wintex 8.2
Also the Expander supply voltage doesn't seem to be showing on the diagnostics either, or is that only shown when using an external supply ? The voltage is a healthy 13.7v on the supply input coming from the Elite 48.
Like I said before everything seems to be working fine, so am I worrying over nothing ?
