Tilting fillets - When to use

[vards01]

Hi all,

Looking for some advice on whether a tilting fillet would be required on a 8/12 pitch using single camber acme tiled roof, I am replacing all the rafters and was curious whether a tilting fillet should be used? Cant really find much info online, but could easily install one at this stage.

Thanks in advance.

 

[^woody^]

It's one for the roofing section!

The eaves tray needs something to rest on and angle it to the top of fascia, so that may need fillets on each rafter or nogings between them.

 

[vards01]

I was planning on using 5U eaves protector as I would prefer something continuous. Also using over fascia vent, so a continuous fillet wouldn't be suitable.

Something like this: