TRV Identification

S

sparkypenguin

Joined
11 Jan 2009
Messages
124
Reaction score
10
Location
Tyne and Wear
Country
United Kingdom
Hi all,

One of my TRV heads has broken and I only want to replace the head and not the valve.
After a quick google I think I will need to use the exact same head to ensure the calibration is correct.
It is a Boss with no part number on it and it is quite old so I am hoping that someone can identify it for me?
I have attached a photo.
Any help would be much appreciated.

Regards,
Mark.
 

Attachments

  • 20230121_092059.jpg
    20230121_092059.jpg
    112.3 KB · Views: 63
Would have thought something like this would fit. They’re also similar in appearance to Pegler bulldog/terrier valves, but like Ian said, standard heads should fit too.
 
CBW said:
Would have thought something like this would fit. They’re also similar in appearance to Pegler bulldog/terrier valves, but like Ian said, standard heads should fit too.
Click to expand...
your link is the exact same valve as he has, but just wants to change the sensor, not sure if you can buy a sensor only for that one , maybe try ebay
 
ianmcd said:
your link is the exact same valve as he has, but just wants to change the sensor, not sure if you can buy a sensor only for that one , maybe try ebay
Click to expand...
Tbh mate, I’ve looked at eBay and they’re quit expensive for just the head :cry: They have a 10/8mm version slightly cheaper for just the head
 
You must log in or register to reply here.
Back
Top