After many years, my door has started to rub at the bottom corner (far side from hinge). I seem unable to adjust anything and I can't find any image of the hinge. At the top and bottom of the hinge, there is nothing to adjust - when the plastic caps are removed there is only a smooth round pin. There is a small plate which can be removed from the hinge when the door is open, and this covers a small "captive bolt and nut" - but I cannot access this bolt make any adjustment - see photos
HINGE WITH FLAP REMOVED SHOWING "CAPTIVE" NUT/BOLT
PHOTO SHOWS INABILITY TO INSERT ALLAN KEY BECAUSE OF LACK OF ROOM BETWEEN DOOR AND FRAME.
HINGE WITH FLAP REMOVED SHOWING "CAPTIVE" NUT/BOLT
PHOTO SHOWS INABILITY TO INSERT ALLAN KEY BECAUSE OF LACK OF ROOM BETWEEN DOOR AND FRAME.