Users of caulk/ silicone cartridges - help please!

[Cat B]

Hi all,

I'm currently undertaking a project to redesign the way in which caulk and silicone sealant is packaged due to the unsustainable nature of the rigid cartridges most commonly used.

If anyone could spend 5 minutes filling out the survey below it would be greatly appreciated.

https://www.surveymonkey.co.uk/r/WQCXZTJ


Thanks

 

[empip]

How to reseal open Caulk/Adhesive/Silicon tube
http://www.instructables.com/id/Reseal-open-CaulkAdhesiveSilicon-tube/
Or
http://www.instructables.com/id/Resealing-Half-Used-Caulk-Tubes/

-0-

 

[handyjack]

How to reseal open Caulk/Adhesive/Silicon tube
http://www.instructables.com/id/Reseal-open-CaulkAdhesiveSilicon-tube/
Or
http://www.instructables.com/id/Resealing-Half-Used-Caulk-Tubes/

-0-

Nice one cheers

 

[Mw Roofline]

Done. And I hate sausages. Good luck.

 

[ladylola]

I just keep a spare nozzle and swap it over when I need to . The set silicon in the original tube is easy to pull out to reuse the next time . No fuss and rarely more than a nozzle full gets wasted ( and half of that has set anyway) .

 

[conny]

In the past I have pulled off any excess at the end of the nozzle then blew out whats left in the nozzle with a bicycle pump.
In work I simply use a compressed airline to clear any set caulk in the nozzle.