- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
Not that old. Within the last 12 months.
Veritas R8 alarm two tone beep fault
- Thread starter houstonwehaveaproblem
- Start date
what is recorded in the event log?
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
How do I access that? I have codes to get into it
It is in the manual, i would use the engineers mode, but 41-47 are the basic event logs and pressing omit whilst in each will provide additional information.
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
Entered event log and have zone 1 flashing and zone 4 on ?
Zone 1 is the pir in the entrance hall by the keypad
Zone 1 is the pir in the entrance hall by the keypad
Are you sure you haven’t turned chime on another zone or you have a faulty contact making it chime ? Turn off chime and see if you still get the noise
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
Not turned chime on.
I have a contact on the back door but the system is unset? It's as if the panel is resetting itself
Chime works on unset ….
Press the musical note …a chime noise says it’s on
A error noise says it’s off
Press the musical note …a chime noise says it’s on
A error noise says it’s off
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
Just checked. Got an error beep
So it was on ….it is now off
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
Ah perhaps pressed chime by accident when setting the alarm recently. Seems odd. Will chime sound if any pir is triggered in the house?
Last edited:
Depends on what chime was programmed on originally…..let’s just see if it does it now ….everything is a guess unless your there yourself
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
So they where all on chime ?
- Joined
- 6 Nov 2008
- Messages
- 823
- Reaction score
- 12
- Country
No idea! They shouldn't of been