wall preperation

D

dave68

Joined
23 Mar 2007
Messages
55
Reaction score
1
Location
Staffordshire
Country
United Kingdom
hi , moved into house ripped off some 1970's wood effect panels off kitchen walls to find just painted brick , plasterer has requested me to apply some sort of primer before he can dot & dab board on top , what do i use to prep the walls .many thanks
 
Shouldn't really need to prep walls for dot n dab really. If it was bare unpainted brick then the only thing I do is to dampen the bricks down first before applying the adhesive.

Regards

Fred
 
i did think about using pva glue then reading through some of preivious posts that its only used for absorbent materials.
 
there is a chance that the walls may have been glossed. if so, use a strong pva mix, only dilute to say 50/50. apply the mud whilst the pva is still tacky.
 
Tell the plasterer to do the whole job or get rid of him - he doesn't know what he's doing.
 
thanks for replys , i was a little suprised with what he wants , i dont mind helping anyone so longs as decent job is done and price is right , had a few quotes this one i choose on recomendation and price but like you say his job, cheers ,dave
 
finally sorted primer was a bonding coat ,pink stuff with grit type material in , got some from wickes ,dave[/b]
 
Ahh, Wickes Plaster Bonding Agent. Made by Knauf.

Same as Thistle Bond It. Contains silicone aggregate and sets like rock providing an excellent key on shiny surfaces.

Regards

Fred
 
thats the one , never heard of it till now , thought pva was the stuff on the market , plasterer doing fantastic job , well pleased ! . dave
 
As a general rule of thumb, PVA is the stuff to use, However, there are some surfaces that are too smooth and not porous enough to provide a key for the finishing coat so the skim just slides about everywhere and makes a horrible mess. In addition, it doesn't bond too well when dry and is quite likely to come off in nice big sheets.

That's where the Bond It comes in. Spread it on. Leave overnight. Bingo. Lovely rough surface to plaster.

regards

Fred.
 
You must log in or register to reply here.
Back
Top