- Joined
- 15 Mar 2020
- Messages
- 27
- Reaction score
- 1
- Country
So I have been building out an en-suite and I've done the waste pipework for the basins and the shower.
To get the WC to hook up to the WC3 I need a straight connector, not very long but the standard built-in connector isn't enough. I've tried a McAlpine one:
McAlpine Macfit WC Straight Connector 4"/110mm:
https://www.toolstation.com/mcalpine-macfit-wc-straight-connector/p72849
and in my tests, from where the start turner wc3 meets the extender, it drips as per the attached pictures.
Now from what I have been reading, the manual just states attach directly to the WC pan, no mention of allowing connectors so I'm guessing it's not supported.
I was thinking maybe on the off chance this might work:
McAlpine Straight Telescopic Socket Extension For WC Pan Connectors WC-CON-EXT
https://www.ebay.co.uk/itm/353259582698
Since it's not flexible and solid, otherwise, I have to find a way to get the macerator moved forward and attach it directly.
So open to ideas or open to just being told I have to find a way to make them fit directly, as you can see it's not behind a wall or anything that's one of the big stipulations about the WC3 install.
Cheers
To get the WC to hook up to the WC3 I need a straight connector, not very long but the standard built-in connector isn't enough. I've tried a McAlpine one:
McAlpine Macfit WC Straight Connector 4"/110mm:
https://www.toolstation.com/mcalpine-macfit-wc-straight-connector/p72849
and in my tests, from where the start turner wc3 meets the extender, it drips as per the attached pictures.
Now from what I have been reading, the manual just states attach directly to the WC pan, no mention of allowing connectors so I'm guessing it's not supported.
I was thinking maybe on the off chance this might work:
McAlpine Straight Telescopic Socket Extension For WC Pan Connectors WC-CON-EXT
https://www.ebay.co.uk/itm/353259582698
Since it's not flexible and solid, otherwise, I have to find a way to get the macerator moved forward and attach it directly.
So open to ideas or open to just being told I have to find a way to make them fit directly, as you can see it's not behind a wall or anything that's one of the big stipulations about the WC3 install.
Cheers