Is it to allow fitting in an 1800 recess/alcove with 5mm tolerance at each end?
I'm putting a bath alcove together (stud/Aquapanel) and was wondering anyway, what gap to set at the ends between bath & Aquapanels (panels to drop 10mm below rim). The bath showed up 10mm shorter than expected, luckily I haven't fixed the stud yet.
I'm putting a bath alcove together (stud/Aquapanel) and was wondering anyway, what gap to set at the ends between bath & Aquapanels (panels to drop 10mm below rim). The bath showed up 10mm shorter than expected, luckily I haven't fixed the stud yet.
Last edited: