Will this plume pipe fit ?

W

worcesterman47

Joined
13 Oct 2006
Messages
268
Reaction score
1
Location
Worcestershire
Country
United Kingdom
We had a new baxi solo boiler fitted but Eon did not fit the external plume pipe.. still waiting for a reply from them...in the meantime would the following link to the pipe should I buy it fit ?..I've also added some pics of connection I need it to fit

https://iforcemarketzone.com/products/baxi-multifit-solo-standard-horizontal-flue-inc-elbow-100-x?variant=8573615210549&utm_medium=cpc&utm_source=google&utm_campaign=Google Shopping&gclid=CjwKCAiA1ZDiBRAXEiwAIWyNC2cnN_I3Zdoa-bJ94pfGagebdsofx1Tn2Bn9pjoRV-ZtonW1f3epThoCqV0QAvD_BwE

Many thanks for advice/help in advance
 

Attachments

  • IMG_20190120_133847.jpg
    IMG_20190120_133847.jpg
    103.2 KB · Views: 156
  • IMG_20190120_133759.jpg
    IMG_20190120_133759.jpg
    377.9 KB · Views: 171
  • IMG_20190120_133750.jpg
    IMG_20190120_133750.jpg
    524.7 KB · Views: 156
that's the exact same flue as what you have, from memory Baxis need a whole different flue for a plume kit, best to wait for your installer to have a look.
 
Hi...just to be clear....the photos I put up are of the fittings that Eon put in BUT they did not actually fit the vertical pipe to it....so all I really need is the vertical pipe bit. If that makes it clearer...many thanks
 
Because..Eon did not put a vertical pipe on when they installed the new boiler...now all the steam from the outlet (without the vertical pipe attached) clouds around the backdoor area...instead of being approx 2ft higher and away from the door.
 
As said you can't just stick a pipe on the end it's a whole new flue and actually it's not the most straightforward to fit either. It's deffo a job for a registered engineer
 
Thank you guys.I will now look further into it and once again I will contact the installer to explain and make a complaint as I have no answer from them yet...cheers
 
worcesterman47 said:
We had a new baxi solo boiler fitted but Eon did not fit the external plume pipe.. still waiting for a reply from them...in the meantime would the following link to the pipe should I buy it fit ?..I've also added some pics of connection I need it to fit

https://iforcemarketzone.com/products/baxi-multifit-solo-standard-horizontal-flue-inc-elbow-100-x?variant=8573615210549&utm_medium=cpc&utm_source=google&utm_campaign=Google Shopping&gclid=CjwKCAiA1ZDiBRAXEiwAIWyNC2cnN_I3Zdoa-bJ94pfGagebdsofx1Tn2Bn9pjoRV-ZtonW1f3epThoCqV0QAvD_BwE

Many thanks for advice/help in advance
Click to expand...

When was it fitted? The Solo has been discontinued for quite a while, replaced by the EcoBlue range. The plume management kit is unlikely to still be available
 
It was fitted 2 yrs ago...I did not know a pipe should have been fitted at the time it was only when a friend told me...so even though it's 2 yrs ago (and I have no knowledge of boilers etc I have contacted the company to put it right...they may argue BUT how was I supposed to know one was needed.
 
You must log in or register to reply here.
Back
Top