Hi all,
Im in the process of wiring up my theatre room- and have run into a bit of an issue.
I have 6 downlights, all on their own transformers, which will be wired up on a single circuit.
The transformers are 60va Vipers- http://www.tridonicatco.com/kms/media/uploads/viper_en.pdf
The problem im having is that there are 3 inputs on the ac input side. The middle connector is labelled with a ground wire symbol, and the third with an upside down 'F'. The specs state that the third connector is for ground looping/termination- but I was under the impression that it would be live/ground/neutral...
Can someone please clarify this for me?
Thanks!
[/url]
Im in the process of wiring up my theatre room- and have run into a bit of an issue.
I have 6 downlights, all on their own transformers, which will be wired up on a single circuit.
The transformers are 60va Vipers- http://www.tridonicatco.com/kms/media/uploads/viper_en.pdf
The problem im having is that there are 3 inputs on the ac input side. The middle connector is labelled with a ground wire symbol, and the third with an upside down 'F'. The specs state that the third connector is for ground looping/termination- but I was under the impression that it would be live/ground/neutral...
Can someone please clarify this for me?
Thanks!
[/url]