Workshop Build
- Thread starter domdee
- Start date
Actually thought about advertising building these hahaAh rubbish. Won't clog up your build thread, but hope you can find something suitable with a decent boss soon
Perhaps you should go into joinery, looks like you have a knack for it
Might have missed the odd price here and there but think it’s important to inform others
Finished bracing the frame and started wrapping in membrane. Will finish the membrane tomorrow and start cladding hopefully
front is boarded. Looking good if I do say so myself
Daddy’s little helper
More progress made today. Could get used to this not working lark.
Back wall fully boarded.
Roof membrane and battons on.
Next job is to get both end walls boarded.
All sides boarded. Put an 8” overhand on one gable end. Will do the other end tomorrow or Thursday. Then a bit of trim work before the tin goes on the roof.
What is your trade?
Andy
Andy
Did my apprenticeship as mechanical aircraft fitter. Why do you ask?
Your carpentry skills are very good. Well done.
Andy
Andy
Not so great up close but decent with limited tooling. Got my dad to thank for what skills I’ve learnt from him over the years.
but decent with limited tooling. Got my dad to thank for what skills I’ve learnt from him over the years.Other over hang done on the other end. You can see I have a couple rafters that are a bit low. Might have to pack the lats out so it’s not noticeable when the tin goes on.
Bit of trim work. Pretty basic but 3” late on the corners over lapping joints. Not 100% water tight but should be pretty close.
Ok I’ll try!