Hi i have been trying to install a yale night latch lock 40mm narrow, and am struggling.
I have already fit a 60mm onto another door fine, no problem.
The cylinder bar at first wasn't slotting into the lock when i placed it in position on the door. So we cut the cylinder bar down to just over 12mm past the fixing plate. But it still doesn't seem to be connecting. So you can't turn the lock manually whilst it appears to be in place on the door.
It's driving me banana's, i don't know what i'm doing wrong. I didn't need to cut the 60mm cylinder bar down at all, it just worked as it was.
Any help would be greatly appreciated, many thanks
Hazel
I have already fit a 60mm onto another door fine, no problem.
The cylinder bar at first wasn't slotting into the lock when i placed it in position on the door. So we cut the cylinder bar down to just over 12mm past the fixing plate. But it still doesn't seem to be connecting. So you can't turn the lock manually whilst it appears to be in place on the door.
It's driving me banana's, i don't know what i'm doing wrong. I didn't need to cut the 60mm cylinder bar down at all, it just worked as it was.
Any help would be greatly appreciated, many thanks
Hazel
