consumer unit

Hi All, I have a socket in the bathroom which has gone dead. I can tell this is not on a ring main as it only has one set of wires connected to it, could anyone tell me how I would find out whether it is connected directly to the CU or it is a spur off another socket. I was going to open all...

The distance between a new CU and the existing meter will be more than 2m (probably closer to 5m), do I need a trip/isolator between them?

Hi, I've got an old consumer unit in my flat and the light fuse seems to have gone. Can anyone advise how to replace this fuse? Do I need an electrician? Hope not.... Attached photo of fuse box.... Any help appreciated......

Can anyone recommend a consumer units that screwfix stocks? The prices seem to vary from £80-£230? I have a 3 bed end of terrace with the old style fuse box and would like to upgrade. I probably don't need top spec. Thank y'all

First post after getting my first house. So, I've traced the cables round and read up on the regs but I'm going round in circles with checking a few things. Do I need to get somebody in to put these things right before we start to decorate(over the next 5 years!) I would pay for a proper...

Moved into this new house in Dec 2016 , house was built in 2008 - and I notice that although every heating controls (time clock, zone valves, boiler, pump) says protect with DP switch fitted with 3a fuse that the only thing that is protecting the circuit is a SP 10a MCB in the consumer unit...

Hello - just want to double check I am wiring this RCD/RCCB correctly only its only got 'N' stamped on the left hand side. - it is feed/supply from top and Load from bottom isnt it? Thanks.

I noticed today that the mains switch in our CU is a single pole (63a fused) switch (only Live attached) - when did they do away with Double Pole mains switch and wouldnt Double Pole be safer than single pole so that when you turn off the main switch in the CU it kills both live and the neutral...

Hi there. I've got a simple question about isolator switches like this Wylex 100A one. Their datasheet says: "It’s safer because the supply tails are fixed and finalised in a sealed unit – instead of being left hanging loose ready to connect to the meter." but their diagram shows it between...

Hello - my sockets RCD tripped the other day and all sockets upstairs and downstairs went off - all well and good so far - but all the lights in the house were on , and I see in the (GE Euroline) CU that there is only one RCD trip and that is protecting the sockets only - the Lighting Circuit...

Hi, Our current consumer unit is safe and tested, but has a plastic housing and not metal (none flammable) like ideally it should be. Is it possible to just buy a new metal based housing that will slot over my current consumer unit and cover the front, sides, top and bottom, but open at the...

If one's incoming HRC fused cutout was short circuited upstream of the main 60A/80A/100A fuse, is the only other protection the thermal overload on the sub transformer or is there any additional in protection? Do sub transformers have any direct magnetic based overload protection like MCB's do...

Hi, I am trying to disconnect my electric doorbell from the consumer unit. Can I pull out the fuse? I have tried after turning mains off) but it won't come out? (Pic attached) Any help appreciated thanks!

I am going to purchase some high end AV equipment and would like to protect it against unexpected surges (e.g. lightning). What's the best way to do this? I know I could buy something like a belkin surge protector to plug into the wall, which covers 650 joules...

Hi all. We have just moved into a new house, which has an old fused type consumer unit installed in the garage, which supplies the rest of the house. I would like to upgrade the unit to a modern split load type, but is it acceptable to install one in the garage? Or being in the garage, would...

Hi all, Quick question, I have searched through many threads and topics on here but can't find the answer. I have a large garage at the bottom of my garden which has its own consumer unit. The garage has about 12 double sockets and a lighting circuit. What I need to do is to run power to my...

Hi all, Quick question, I have searched through many threads and topics on here but can't find the answer. I have a large garage at the bottom of my garden which has its own consumer unit. The garage has about 12 double sockets and a lighting circuit. What I need to do is to run power to my...

Hi. I wonder if someone is able to advise me or point me in the right direction. I had been wanting an additional double power point installing in our master bedroom. I was ready to have this done by a qualified electrician but on returning home from work at the weekend I found out that my...

Hi, I wonder if anyone could help me. We have recently done some renovations work and my electrician has installed a new consumer unit with RCDs etc. Separate to this is a small older unit which must have been installed when the previous owners had an electric shower installed - this is the only...

Hello all, I’m looking for logic check on some work I’m planning to do, it’s quite a read so settle in, but please check my logic, anything else I should do or check? First things first, no I’m not a qualified electrician but am a competent person, well at least more competent than the...