fault

Hi About 3 months ago the door lock on our washer was clicking constantly. I ordered a new branded door lock and fitted it fine. The plastic connector from the wiring harness to the lock showed some evidence of burning but it fitted OK, still, to the new lock and functioned fine. This...

Hi all, After this forum has been very useful over the years, I now have an issue that I can't find a resolution to despite searching... We have LED lighting fitted in our bedroom (GU10 style downlighters) which is operated by either a simple 2-way switch or by a dimmer switch. Recently, (in...

So I am in the process of getting one of the rooms in my house re-plasterd after it had damp remedial work done to it. Today I took down the existing light fitting that was in the room (was a wooden based 3 x ses swivel light with 3 x 5w SES LED candle bulbs) and I replaced it with a normal BC...

Hi, March last year I've had new pvc windows and door installed. Flat was in process of being redecorated and we really only noticed the problems when it started to get really cold around December. I've noticed a lot of cold draught coming from around the balcony door frame and window seals. I...

Hi all After some suggestions on a problem I'm having with my combi boiler, its a main combi 24 he. The problems occurs mainly when running the kitchen tap or the shower, the hot water runs for a few minutes and then goes cold for a little while and then back to hot again, and does this...

Hi All, My car has developed an intermittent error message. After a few miles driving, the message DSC Not Available appears on the dashboard and it jumps into Restricted Mode (no acceleration). If I switch off and restart, the fault disappears but reappears after a few miles. However...

I have a Glowworm Ultimate 80FF boiler providing hot water and central heating (more than 15 years believe). Cold water tank in attic. hot cylinder (CYL) in airing cupboard with 3 port divertor valve (VALVE), drayton control programmer (PRG) and grundfos alpha pump(PUMP) fitted as well. Recently...

Bought a Tefal OptiGrill about 6 months ago and it was faulty (kept defaulting to manual mode) so returned it the same week and and got another one from a different shop. I have had this 2nd Tefal OptiGrill for about 6 or 7 months and It has been fine up until recently, but recently it has...

Hi there, I havea rd 532i boiler that has stopped working yesterday. I still have hot water but I don't have any heating. The thermostat is electric (checked for battery) when I took the fascia off the boiler got an error code. I have checked the out door condensor pipe which is not frozen...

Hi - can anyone offer advice? My built in dishwasher seems to have stopped drying - it beebs continuously when it seems like the wash is finished but there is no cloud of steam when you open the door the programme light is flashing - the contents is still wet and it won't shut up till you hit...

Hi all, My boiler has been playing up for a while now. It is stuck in a loop where it fires up for a minute (or less most the time) then cuts out, then it makes a horrible noise then tries to fire up again and fails. After couple of attempts if fires up but then it cuts out again not long...

Put the washing machine on last night, but after pressing the start button, it just sits there, then after a wait, the display says "door". The door is latched and locked, but that's all that happens. Please help advise what to check.

A week back our central heating wouldnt come on, with timer or switched to constant. The only way we could solve this problem was to run the central heating while the hot water was on and radiators worked fine. Through reading a lot of forums online and asking a plumber, we thought it would...

Anyone care to repeat this, guess my trailing socket and/or plug must be defective. Not that much force was applied. Socket has got PMS 9128 written on it, plug has PMS 9248 written on it if any help for identifying the brands.

Hi my potterton promax HE115i won't fire up, just stopped yesterday, I've checked the house gas and the hob is working fine, I've turned the house thermostat to max and the programmer setting on the boiler are correct, the pressure is fine, there are no error codes but it won't fire up, I reset...

Hi, I have a Glow-Worm Flexicom 30 cx installed in a ground floor flat. A couple of weeks ago it started reading error messages F4 and F13. The Glow-Worm man who came round opened it up to find some water inside the boiler and said that we had to call the installation man as it looked like an...