hinge

Hi all, I now have 4 walls in the shed (picture update attached!) and have made up a door for the opening. I was originally looking to put T-hinges on, but the ones I bought had a *lot* of play in the hinges, to the point where I was very dubious, and I've now acquired some stainless steel...

Can anyone identify these shower door hinges please? Google doesn't know, and local bathroom and plumbing shops have no idea. I've looked for a manufacturer's mark, but seen anything. Please help!

Hi thought I'd ask for advice incase I mess the door up even more. Noticed last few days there's a draft coming through the front door which we had fitted back in May last year. Not sure if you can see in the pic but the bottom of the door looks slightly out as if it needs moving over to the...

Hello, I have an internal timber door that has dropped by a few mm, presumably due to the hinges getting worn over the years. Here are a couple of photos; the first one shows the hinge in its usual, dropped position... IMG_20171216_114440 by hellopaul2 posted 17 Dec 2017 at 7:47 PM ...and this...

Hi. The hinge in the attached photos has broken and I need to replace it, does anyone know what make and model this is or where I can get it from or an alternative? Thanks

Hi, The house was built in the early 80's and I can't find the right hinge I need, does anyone know where I can get one? The window is side swung, the handle is on the left and the hinge is on the right. The hinge is 30cm long, 2cm wide and 7mm tall. Where can I buy a 7mm tall hinge? I can...

Hi, I have a draught coming from a gap at the bottom right-hand corner of our french door. Does anyone know how this can be fixed? There is a gap at the top right-hand corner too. Image here: https://1drv.ms/i/s!AvxDFgUHUgNCxGQLt7Za-i5ZIY8n Thanks!

The hinge on one of our UPVC doors snapped and I cant find any on the internet that look anything like it. Does anyone know what this kind of hinge is called? (The last picture shows one of the two remaining hinges.) Thank you. 2016-09-04 14.24.43 by r_c posted 4 Sep 2016 at 11:27 PM2016-09-04...

I have just installed new UPVC and having a few troubles getting the alignment setup right. The flag hinges on the door looks as below. From the brief instruction sheet I have it seems the bottom adjuster moves the door up / down. The right adjuster moves the door right / left and the top...

I'm making a secret door in a stud wall. There will be skirting board running along the bottom of the wall and I'd like the skirting to be on the bottom of the door too, to make it look more hidden. The door will be opening inwards so the skirting will be pivoting on to itself. Is there any...

Been asked to mend an MDF wardrobe door in my daughter's house; the hinges have pulled out. It's a great big door, almost 2m in height and about 500mm wide. It's made of 15mm MDF and then has some strips of something (probably thin MDF) on the front to give a panelled effect, so it's pretty...

Hi, hopefully someone could help. Rather than get new windows Im going the full hog a correcting and fixing my current double glazed upvc windows. All have 1x side hung sash. So far I have: Changed all friction hinges Replaced all seals on sash and frame with 6mm bubble seals Replaced all...

I'm repurposing a vintage radio cabinet as a modern stereo cabinet and TV console. As my components will reside inside the cabinet, replacing the original stereo components, I need to be able to access their front control panels while the TV is atop the door/lid. I want to do this by cutting the...

Have an internal built in Fridge from Siemens and now the hinge / bracket seems to have gone at the bottom and I can't shut the door? It resists on closing and pings open about 3 inches with some resistance when it closes? My wife said that a small curly piece of metal shot out the other day...

Hi All Im having trouble finding this type of hinge. The wind blew my uPVC door with quite some force and bent one of the hinges and now the door has become stiff when opening and closing. I've been trying to find this type of hing for a long time but i cant find anyone who sells them. If...

So I had a party at the weekend and someone leaned on my cupboard door. The top hinge has snapped right off as the screws ripped right through the wood. I tried to find a photo on google to show how it looks and the hinge looks almost identical to this one. By the way, the screws which have...