lead

Hi all. I had Bristol water over today to assess my lead replacement. Our water supply is shared with the neighbours (possibly 2 other houses) and is connected in front of their front garden (victorian terrace). Bristol water said we would only qualify for the free connection if we brought the...

Ive had a quote to replace lead which is between the house and a flat fibreglass roof (which is also a fairly large balcony area). The original lead, I am told, was installed wrong, as it wasnt split in to sections to allow thermal expansion and contraction, so it has split. It also seems to...

I’m about to start work on converting and extending an old stone barn. Ground floor extension is due to be flashed into a round stone wall (external of turret style room) for a short section above the door (see picture). Surface of stonework is irregular and curved (see picture) which makes...

My gully was never put in correctly and has always been iffy, I'll have to bite the bullet and get it replaced. The run is long and has rolled joints when apparently it should have steps to accommodate sliding laps. The lead is sat on a membrane (on top of ply) but I was wondering wether a...

In my house the wood has all been painted with a gloss lead paint. The doors, the skirting and the windows. I know I cant paint directly over the gloss and I dont want to sand it because of the dust and with it being lead paint. I have seen a few people recommend primers but wondered what...

hi. Yesterday the builder finished the roof on our extension. I was slightly concerned to see these gaps at the nose of each tile as the flashing steps down the pitch. Potential for water ingress with rain/wind and insect entry?? Any advice would be greatly received. Many thanks.

Hey Folks! I am about to fit a new fibreglass roof and i've got the whole sequence down except this one piece. I've fitted lead flashings before and understand how they go in, but I'm looking at these fibreglass replacements and i'm filled with trepidation. I'm hoping someone can put me out...

Hi, Can't seem to find details of the soakers/flashing required for uPVC window in stud partition with vertical plain tile cladding. Do I need a sill tray/pan Do I need to get heavy with the lead tools and boss out my own Do I need to put soakers in the ends of the tiles as I think I can see on...

What code and size rolls would this gulley need (approx. 350mm wide at base). I'd like to try and price the lead myself. It's been priced to replace, with a new raised section/step in the middle. They reckon it'll be done in a day. Access to the roof is easy, without need for scaffolding or...

A DIY frenzy over the BH weekend uncovered a layer of paint (rubberised by the steamer) underneath the paper. I peeled this all off and disposed of it, leaving another layer of yellowish paint with a powdery finish on the wall and a few cracked areas revealing another layer of green paint...

Apparently it's lead. That's all I know...

Hi, Guttering question. My house is about 150 years old and the guttering is a trough built into the top of the wall. Stone tiles on the roof and the gutter doesn't protrude over the edge. I don't know what you call this system but it's lead lined and I don't think it's sound. The lead doesn't...

The other day I was doing quite a lot of soldering (with lead based solder :rolleyes:) in my Kitchen (Making up audio cables) and I noticed that I got a headache towards the end of it. Is this normal? Next time I might think to turn the extractor hood on, as it was near to where I was...