lime

Morning all, I removed the architrave around a ~100yr old sash window and a load of plaster came off, which wasn't a surprise. I've removed the lose plaster which has left a gap all around the window between the brick and wood liners / frame. The attached photos show the area above the...

I have uncovered a large red sandstone fireplace (about 2 meters wide and a meter deep). It had been infilled with a large amount of bricks and cement. The stones at the back of the hearth are in very poor condition and in places have brushed away completely, exposing the concrete harl on the...

I have a 1910 London house covered side and back with limewash, then masonry paint on top, it was like this when we bought it and have been trying to figure out how to remove it ever since. The masonry paint is fairly loose and peeling in most areas (common for paint over limewash). Chemical...

I'm about to put the finishing coat of lime and sand on the internal walls, over lime hemp plaster. Can I use standard sharp sand from a builders merchant to mix with the putty? I'm sure the putty supplier will answer this when I go there tomorrow, but I'd prefer to be just a little less...

I'm using Ty Mawr, ready-mixed, fine-grade hemp plaster to do a base coat on an area of an interior brick and stone wall. Hopefully this picture links works ...Lime Plaster Cracking by slowlybutsurely posted 4 Jun 2016 at 11:04 PM It's filling in area surrounded by good sound plaster (regular...