plaster

We've just stripped one of our rooms right back to the old plaster (walls are plaster on brick) and plan to skim over the top. I have 2 questions: We've knocked out a small patch of lose plaster right back to the brick. Can we patch this with some plasterboard and fill before the skim coat? Or...

Hi everyone looking for some assistance please as new to the whole renovation side of things. We are having a brand new central heating system fitting into our new flat in January as currently we have no heating at all. The only available wall is a stud wall which we'll be pulling down and...

Hi all, Been having something of 'mare since moving in a recently bought 50/60s bungalow. Previous lot hung a big picture on the chimney breast, and now I know why! Been around the houses on this and any thoughts would be great: 1- When stripping back walls, pre-decorating, we revealed big...

I've just about finished the building work before putting in another log burner. Where I had to remove plaster around the opening on the chimney breast face, I've used Hardwall leaving 2-3mm for the final top coat of multi finish (see pic). I'm worried however, that the multi finish will crack...

Hello I have a question (no doubt asked in various formats in many other threads) about some work we are planning on getting done. Our living room (old building, 1800s) has a single skin wall and there are signs of damp near floor level- small patches, but there. The flooring was lino done on...

Hi there, Newish home owner here. Since I moved in 9 months ago I'm hearing the occasional click/tick in the mid morning, a sound which appears to be manifesting itself in cracking plaster (As per photos). This is within a built in cupboard on an upstairs external wall in the middle of the...

I have a room that was previously a car port that will need plastering. It has bare thernalites, thermalite infill up to steel lintels, painted render etc. All sorts, possibly needs quite a bit of mesh to straddle the interfaces between the various types of blockwork wall. What can I expect to...

Hi, guys, Currently having a nightmare, my ceiling plasterboard has been removed by my plasterer because of cracks and leak. I have him booked in for Friday (Tomorrow) 22nd September 2017 to put up the new plasterboard and skim etc.... Sadly, my plaster does not have a van to pick up the...

Hi. I am planning on tiling my living room wall with reclaimed brick slips that I have already purchased along with the adhesive and mortar. I have just stripped the paper from the wall and a lot of plaster crumbled away. I believe that the house had warm air heating and I am now concerned about...

Basically I wonder if anybody could give me any tips on making my loft space into a nice clean usable area. First of all I am not putting in any stairs I am still going to be using the existing loft ladder the space up in the loft is very large indeed I was hoping it would be okay to keep the...

Hi, my house is 1900 Victoria terrace with a ground floor passage ginnel on one side. I have a tiny single brick room on the second floor. The brick is old stock I think and is very soft. The mortar is lime and the original plaster was lime. Someone has skimmed over the plaster with a cement...

I have this 1sr floor lounge wall that, although soldly built, is a bit of an eyesore.I would like it plastered, I don't like plasterboard. Any thoughts?

Hi Guys, I am in the process of fully refurbishing my upstairs bathroom, with a new suite. All of which shall be put into the same place due to the space restriction. Below is my current bathroom & floor plan which you can tell is a small bathroom. I would like the new bath, basin cabinet &...

I have a dark solid wood floor in my hallway. Recently I've had to do a bit of filling and sanding of the walls and ceiling in the hallway, and unfortunately, despite my best efforts, some of the very fine plaster dust has got into the grain in the wood floor, leaving a white "bloom" in certain...

I've a steel kitchen sink which has ended up coated in lime plaster - I'm using 32% hydrochloric acid (spirit of salts) to clean it off, which seems to be working really well. I'm thinking of using the hydrochloric also on the mixer tap, which looks like a chrome finish - I'm intending to try a...

Morning all, I removed the architrave around a ~100yr old sash window and a load of plaster came off, which wasn't a surprise. I've removed the lose plaster which has left a gap all around the window between the brick and wood liners / frame. The attached photos show the area above the...

Hi We've removed all the wallpaper in the room which we are getting re-plastered by a plasterer. The wallpaper was damaged by damp and I wonder if there is anything we can do to protect the new plaster from damp? Either before or after plastering. Or should we use a specific plaster? Also...

Hi Another Victorian house held together by thick wallpaper. I've stripped it off, but unsurprisingly the plaster needs removing too. Is it possible to preserve that nice plaster coving? Or will it all fall down the minute chisel hits plaster? 20170530_130741 by MICH43L posted 30 May 2017...

I watered down vinyl matt paint and used it as an undercoat on top of fresh plaster thinking it was matt emulsion. I have not done a second coat yet and would like to know if I should continue or fix it and if I should fix it, how? If it is of any helps the colour that I would like to finish...