plasterboard

I’m renovating my bathroom and installing tile backer board on several walls where tiles were removed. These walls are in and around the shower. There are two other adjoining walls with moisture resistant plasterboard. Should I remove the plasterboard from these walls as well, or can I leave...

Hello, Seeking advice on what type of wall plug to use to safely install a curtain track on a plaster board ceiling for heavy curtains. Some background: - I am currently looking to hang a curtain track on my ceiling as a room divider. - The track is 255cm (cut to size) and is this brand...

Hi, I'm about to plasterboard half a bathroom this is the exterior wall and it is a cavity filled wall. My question is after securing the plasterboard with adhesive can you then use screws for extra hold of the boards to the walls? Any one have any idea on this

Hi All, I recently moved to the UK and am confused about the various fillers and joint compounds. I’m fixing a corner where the wall meets the ceiling and putting in new joint tape. What should I use and can someone give a quick rundown? What’s the equivalent of “mud” in the US? Is polyfilla...

Heya, I want to insulate the ceiling in the bathroom, which is also the roof at the top of the building. Wondering what's the best option or if there's any special considerations for this scenario? Does there need to be a vapour barrier? (or use foil backed plasterboard?) The rafters are 100mm...

Hi, I am in the process of undertaking my first DIY project in my new home. I am building a false tray ceiling - similar to below: I have a few questions with regards to the most appropriate edge beading for the plasterboards, see below diagram with a section of the tray ceiling. My questions...

I need to cut into a boxed part of the wall downstairs to access some badly fitted plumbing from when the house was built,. I am wondering what the best approach is? The attached picture gives some idea of what I think maybe the best method, as in staying at least 1 inch away from the edges, to...

Currently midway through doing my ensuite. This photo shows the wall behind where a concealed cistern toilet will be. There will be a shelf at the top of the toilet going back horrizontally to the external brick wall - as such the top half of the brick wall will be plasterboarded and painted...

Hi all I had a burst pipe in the utility last year which resulted in me taking a kitchen cupboard off the wall to access the pipe. The wall was a wet and it left a big hole where the fixing was for the kitchen cupboard. There is now a big hole in the plasterboard which I now need to fill so I...

Hi. Quick question about bathrooms and tiling! I am currently working on the walls of a new bathroom! I will use moisture resistant plasterboard in the ceiling and tile backer boards on the stud walls! I would like to dot n dab a 40mm insulated plasterboard against a block wall. Can I use...

Hi, I'm renovating my upstairs bathroom and have taken the walls back the the brick, and replaced the ceiling with PIR + new plasterboard. I will be replacing the existing floorboards with 18mm plywood but I'm unsure whether I should: 1. Plasterboard the walls, then underfloor plumbing, then...

Hi everyone :) we are installing MRMDF/moisture resistant mdf T&G panelling on 3 walls of our bathroom floor to ceiling, they are 2 new stud walls and 1 single skin brick wall with old plaster in bad condition. We are having plasterers in for elsewhere, but is there any point plastering the...

Yet another issue to solve in the house that I've bought :LOL: It doesn't look too big in the photo, but this is a pretty large protuding plasterboard bodge that's somehow been fixed into the wall of our lounge. Originally I was seeing if I could smooth over the edges with polyfilla (see the...

Hello everyone. This has probably been discussed previously but have not found any informative posts making me feel a bit better. (panic) So as many other fellow DIYers, I have purchased a nice Victorian terraced house built in the 1920s.The big renovations have started today and boy is the...

So I got a single skin outhouse with a dpm below concrete and I’ve tanked it for good mesure. Plan was to 2x1 batten out walls at 400mm apart with a dpm strip behind & not touch the floor with them. Then 50mm PIR celotex over the top to create a small cavity (taping joints) then foil back...

Hello, I’m currently in the process of redecorating a property I’ve had for less than 6 months and decided to tackle the lounge. One of the outside-facing walls has a partition made and after I’ve painted it white I’ve noticed that the studs behind seem to be pushing through and causing the...

So based in the UK, doing a full-house renovation at a typical Victorian semi-detach. UK fire regulation means we need to build this firewall along the staircase. question is how do I finish the plasterboard bordering with the staircase as I assume they will crack from day 1? Do I put end...

Hi, I've got some newly-fitted 12.5mm plasterboard and want to hang a couple of curtain rails up. The rails have three fixing points on each side. The poles are only around a metre long, each. The hollow anchors I bought say they're for a minimum of 8mm thickness. (B&Q M4 32mm). My plasterboard...

Hi all. This has been coveted in similar ways a number of times. My other half lives in a flat that has dot and dab plaster board walls. Some time ago I decided to use reclaimed pallet wood to make a feature wall. The wood is secure with nails on 5 1.5" x 2.5" buttons running vertically...

Hello everyone, I'm new to the forum and am currently doing my house myself. The problem came when I tried to plasterboard the kitchen, since the walls in kitchen are uneven and some places have lose plaster. I'm trying to avoid using dot and dab just to save some space in my not-that-wide...