render

I`m planning to render the tired looking and over painted 1930 pebble dash. I know someone will say to remove the pebble dash completely but doing that would cause load of vibration and crack on a fully refurbished house. I was thinking to nail the EML mesh to the existing render than 2 coat...

Moved into our property (built in 1889) in May. Following some recent rain an internal wall has started to show signs of damp. Think it’s penetrating through the gaps in the render/plinth (see pics) any advice on how best to repair? We are complete novices so will likely need a professional, but...

Hi everyone, Does anyone have any idea what the source of this cracking might be? It's a 1960's house with brick walls at ground floor measuring 300 mm thick, the first floor (front and rear elevation) is rendered and measures around 260mm thick so i'm assuming it's a different walling...

Hello! I am a new homeowner and completely lost in the dark. I have noticed some spalled brickwork at the bottom of my side wall. No damp on the inside, think they’re just old and weathered. Any advice? Do they need to be removed? Or could I get away with repointing and the getting render on...

Hi, Landscapers have built a new retaining wall, steps and raised beds. Retaining wall is lined with DPM and weep holes at bottom. It’s going to have K Rend. I’ve got a few questions before they get started with this stage to ensure it lasts as long as possible. I will ask them too but I know...

Evening, I have this hole in the render outside in the wall and I want to fill it in, it's a solid brick wall and the dpc is stepped, the porch dpc is highier than the original wall. I filled the hole in originally with lime nhl 3.5 and finished in lime wash, hoping it would breath and...

Hi All, I am going to render the walls after my Extention completion. The question is - I'm extending the backside kitchen (single floor), for the roof, do I need to fit the lead into the wall and cement it? my roofer says just nail to the wall and render will cover that and no water will go...

Hi all, Looking for some assistance on wall build up for a SIPS systrem (I am using the Kingspan TEK system if that helps). The outside of the SIPS panel have been wrapped with a breather membrance and are then to be clad with 50mm rockwool, which will then be rendered using something like EWI...

A chunk of render (?) fell off the side of the roof on my single storey extension last week. See attached pics. How should I approach fixing this? It looks like I should be able to just trowel something back on after maybe brushing loose material away. I'm trying to avoid buying a sack of...

Hi, I've got a 1930s Semi with solid brick walls and the original roughcast render, which presumably will contain lime for the solid brick to breathe? What's the best way to go about improving the look of it? as it's showing its age and doesn't look great. Had quotes to hack off and re-render...

Hi all, I've had walls built in my garden and they've mostly now been rendered with K-rend. I've noticed that I can see water coming through the render - especially seems to be tracing the pattern of the mortar (see photos) Is this just part of the normal drying out process or is there...

Hi all, Please can I get some advice on replacing the cement render on this window wall? Picture attached I have also attached a close up picture of the cement render on other walls so you can see what it's like The cement render was all cracked and falling off above the window, behind is the...

My builder asked me if I wanted a drip bead / bell detail at dpc. He said the render is water proofed so taking it to the ground is not a problem. Also its block paving around the building and during torrential rain there is no pooling of water near the walls. I have now done some some research...

I have a builder who has been working for me for a number of weeks and he has done a lot of work for me in the past. he is a jack of all trades, very handy guy and we have and receptive to my 'research'. Due to most of the the house being old and somewhat awkward he advised me to take the...

Hi , The boxed in support beam in my kitchen had water coming in. The hole in pic was made to see where exactly the water was coming from (photo attached). I've been told three different things - that it's because there is probably no tray in the cavity wall, that it's the render, that it's the...

This may sound stupid but my exterior wall in pebble dash painted over the years looks old and wondering if this can be over covered with new render without removing the pebble dash as seem very strong and would be a mess to remove it first. Any experience tips advise would be highly appreciated.

Hi there, Just moved into a new house which is an old terraced house built around late 1800s. There is plenty of work to get done on it not least the front rendering. The previous owners provided an invoice for work carried out in 2015 for damp proofing, pointing rendering the front of the...

Hi, I'm an inexperienced first time buyer. November moved in to the house to find damp plaster on 1st floor bedroom wall (external). Based on the description below and attached pics, what might be likely causes of the damp, and what repairs should I realistically expect? Are there any specific...

Hi, just signed up and wondering if anyone here can help with this one… We live in a 1920s solid-walled house (red brick, cement rendered) that has a tendency towards dampness in the basement. Generally it’s all in check but we do get the odd issue here or there. When we moved in we had gas...

Hi, we bought a house on a new development 2 years ago, the house was a couple of years old at the time, so is now around 4 years old. A crack has now appeared in the render above the front door. I have approached a company to see if they can repair it but, based on the pictures, they have...